Best Humidity Controlled Smart Plug

Facebook
Twitter
LinkedIn
Pinterest
Pocket
WhatsApp
humidity controlled smart plug – Best Humidity Controlled Smart Plug
Quick answer

What is a humidity controlled smart plug?

A humidity controlled smart plug switches an appliance on and off based on a humidity reading. Plug a dehumidifier into one and it runs only when the room gets damp, which saves electricity and stops you forgetting to switch it on.

In this guide
  • Standalone controllers vs smart-home combos
  • Our top picks
  • Which dehumidifiers work with a smart plug
  • Settings that avoid short-cycling

A humidity controlled smart plug is one of the cleverest upgrades you can give a basic dehumidifier. Many budget dehumidifiers have crude humidistats, and even good ones measure humidity right at the machine. A smart plug paired with a separate humidity sensor lets you switch the dehumidifier based on conditions where the problem actually is, such as a cold bedroom wall, a garage or a wardrobe.

There are two ways to do it. The simplest is a dedicated plug-in humidity controller with its own sensor, which needs no app or Wi-Fi. The more flexible option is a smart-home combination: a Wi-Fi or Zigbee smart plug plus a separate humidity sensor, linked with an automation in an app. This guide covers both, recommends specific products and explains which dehumidifiers work with this approach. If you are still choosing a dehumidifier, see our guide to the best dehumidifiers.

Key Takeaways

Key takeaways

  • Best standalone Inkbird IHC-200: plug-and-play humidity controller with a built-in probe and dual outlets.
  • Best app version Inkbird IHC-200 Wi-Fi: same idea with app control and alerts.
  • Best smart-home combo A SwitchBot, Tapo or Shelly plug paired with the same brand’s humidity sensor.
  • Crucial check Your dehumidifier must restart in its running state after power is cut and restored.
Top picks

Our top picks at a glance

humidity controlled smart plug: A plug-in humidity controller with a sensor probe on a lead, connected to a dehumidifier i

The most important compatibility check

A smart plug works by cutting and restoring power. That only controls a dehumidifier if the dehumidifier starts running by itself when power returns. Models with a mechanical rotary switch, or electronic models with an "auto-restart" or "memory" function, usually do. Many electronic dehumidifiers instead power up in standby and wait for you to press a button, in which case a smart plug will not turn them on.

Test it before buying anything: with the dehumidifier running, switch it off at the wall, wait a minute, then switch it back on. If it resumes, it will work with a humidity controlled smart plug.

Our picks for the best humidity controlled smart plug

1. Inkbird IHC-200 – best standalone controller

The Inkbird IHC-200 is a plug-in humidity controller with an integrated sensor on a lead and two outlets: one for a humidifier and one for a dehumidifier. You set a target humidity and a differential, and it switches the dehumidifier on when humidity rises above the target and off when it falls. It has high and low humidity alarms, a sensor fault alarm and humidity calibration, and the UK version handles loads up to 10A. It has been listed for under £30. There is no app, no Wi-Fi and nothing to set up beyond the buttons, which many people see as a plus. Full details are on Inkbird's product page.

Best for
Garages, sheds and workshops Anyone wanting a simple humidistat upgrade
Pros
  • Plug-and-play, no app needed
  • Sensor on a lead you can place where the damp is
  • Dehumidification delay protection
  • High and low humidity alarms
Cons
  • Basic display and buttons
  • Sensor lead limits placement distance
  • No remote monitoring on the standard model

2. Inkbird IHC-200 Wi-Fi – best with app control

The Wi-Fi version of the IHC-200 adds the InkbirdSmart app, so you can check humidity and change settings from your phone and receive alerts. It uses 2.4GHz Wi-Fi only. It is particularly useful for garages, holiday homes and outbuildings you do not visit every day.

3. Smart-home plug and sensor combos – most flexible

If you already use a smart-home ecosystem, a matching plug and humidity sensor gives you far more control. Popular options in the UK include:

  • SwitchBot: SwitchBot's thermo-hygrometers work with its hub to trigger scenes, including switching a smart plug.
  • TP-Link Tapo: Tapo's energy-monitoring smart plugs can be paired with its temperature and humidity sensor through a Tapo hub and controlled with the app's smart actions.
  • Shelly: Shelly's plugs and humidity sensors can be linked in the Shelly app or via Home Assistant.

These setups let you add schedules, for example only allowing the dehumidifier to run on cheaper off-peak hours, and many smart plugs report energy use so you can see exactly what your dehumidifier costs. Our guide to the best hygrometer for UK homes covers the SwitchBot sensors in more detail.

4. Home Assistant – best for tinkerers

If you run Home Assistant, almost any supported plug and humidity sensor can be combined, with full control over thresholds, minimum run times and notifications.

Step List

How to set up a humidity controlled smart plug for a dehumidifier

  1. Check auto-restart

    Confirm the dehumidifier resumes running after the power is switched off and on at the wall.

  2. Set the dehumidifier to run

    Set it to continuous or its lowest humidity setting so the plug, not the dehumidifier, decides when it runs.

  3. Place the sensor carefully

    Put the sensor where damp forms, away from the dehumidifier’s exhaust and away from radiators.

  4. Choose a sensible band

    Switch on at about 60% and off at about 50–55%. A wide gap prevents rapid on-off cycling.

  5. Add a minimum off time

    Compressor dehumidifiers should rest a few minutes between cycles. Use the controller’s delay feature or an automation condition.

  6. Check the load rating

    Make sure the plug is rated for the dehumidifier’s power. Most are fine, but check anything above 10A or 2,300W.

Does a humidity controlled smart plug save money?

It can. A dehumidifier left running on a fixed timer often works when the air is already dry. A humidity controlled smart plug only lets it run when it is needed. At 26.32p per kWh under the current Ofgem price cap, a 200W compressor dehumidifier costs about 5p an hour, so cutting just three unnecessary hours a day saves around £4–£5 a month in winter. For a desiccant model at 500W or more, the savings are larger.

Our verdict on the best humidity controlled smart plug

For most people, the Inkbird IHC-200 is the best humidity controlled smart plug: it is cheap, reliable and needs no app. Choose the Wi-Fi version for remote alerts, or a SwitchBot, Tapo or Shelly combo if you already have a smart home. Whatever you choose, check your dehumidifier restarts on power-up first, set a sensible humidity band and protect the compressor with a minimum off time. Garage owners should also read our guide to the best dehumidifier for garage use.

Frequently Asked Questions

Frequently asked questions

Can I control a dehumidifier with a smart plug?

Yes, if the dehumidifier resumes running when power is restored. Test this before buying a smart plug.

What is the best humidity controlled smart plug?

The Inkbird IHC-200 is the simplest and most reliable option, with a built-in sensor and no app required. The Wi-Fi version adds app control.

What humidity should I set the smart plug to?

Switch on at around 60% and off at around 50–55%. A wide gap prevents the dehumidifier cycling on and off too often.

Is it bad to switch a dehumidifier on and off with a plug?

Frequent short cycles can stress a compressor. Use a wide humidity band and a minimum off time of a few minutes.

Do humidity controlled smart plugs work with desiccant dehumidifiers?

Yes, if the dehumidifier restarts on power-up. Desiccant models are less sensitive to short cycling than compressor models.

Conclusion

Best humidity controlled smart plug: verdict

  • Check auto-restart before buying
  • Use a 50–60% humidity band
  • Protect compressors with a minimum off time

The Inkbird IHC-200 is our top pick for a simple, reliable humidity controlled smart plug. Smart-home users can get more flexibility by pairing a SwitchBot, Tapo or Shelly plug with a matching humidity sensor.

    Facebook
    Twitter
    LinkedIn
    Pinterest
    Pocket
    WhatsApp

    Never miss any important news. Subscribe to our newsletter.

    Leave a Reply

    Your email address will not be published. Required fields are marked *